With the revolutionary EC-TEC “brushless” motor, the durable C 12 Li Drill Set with T-Loc Systainercan easily power through over a million screws with minimal wear. The brushless motor is extremely energy efficient, which translates into longer run times and fewer trips to the charger. The compact design can fit into more places without the extra bulk and weight of traditional drill designs. Combined with the Festool FastFix chuck system, the C 12 Li can do the job of five drills. All of this power and capability packs nicely into one slim design. Never before has something so small been able to do so much

Features:

• EC-TEC Brushless Motor
  Brushless motor design is long lasting, and energy efficient. Equipped with thermal protection and low battery signal, which protects the motor and battery pack.
• Convenient Reverse Button
  Forward/reverse toggle button conveniently placed.
• Ergonomics
  Perfect balance and handle design with surrounding soft-grip reduce the stress on your hand and joints.
• Variable Speed Trigger
  Variable speed trigger and easy access reverse button for your varied needs.Self-Cleaning Spring Contacts
  For reliable contact from the battery pack to the drill.
• Magnetic Bit Storage
  The magnets in the retaining grooves hold up to six bits, ready for use at any time.
• Compact Design
  Compact size, low weight, and optimum center of gravity gets into more places.
• 42 Separate Torque Settings
  Two speed settings and twenty one distinct torque settings cover the entire range of need, from low speed, high torque to high speed, low torque.
• Independent Drill & Drive Mode
  The torque selector switch features a position for drill mode, which overrides the slip clutch for non-slip power to the chuck.
• FastFix Tool-less Chuck System
  FastFix tool-less chuck system and accessory chucks dramatically expand the range of the C 12, taking the place of 5 different tools.

Included in Package

• Charger
• 2 batteries
• FastFix Keyless Chuck
• Centrotec Starter Set
• Centrotec Chuck
• SYS 1 T-Loc Systainer

Specifications

Chuck Capacity	1/16" (1.5mm) - 1/2" (13mm)
Max. Torque in Steel	300.9 in-lbs. (34 Nm)
Max. Torque in Wood	177 in-lbs. (20 Nm)
Battery Voltage	10.8v (12v max)/1.5 Ah
RPM (Setting 1 / Setting 2)	0-450 / 0-1500
Motor Type	EC TEC Brushless
Max Drill Diameter (Steel)	9/16" (14mm)
Max Drill Diameter (Wood)	1" (25mm)
Torque Setting Range	0.5 - 8 Nm (4.4-70.8 in lbs)
Weight	2 lbs 10.3oz (1.2 kg)