Thanks to Festool's innovative FastFix chuck system, the T15 +3 Cordless Drill (Non Set) with T-Loc Systainer is incredibly versatile. The keyless drill chuck can be used with drill and driver bits up to 1/2" in diameter. For lighter weight and a more compact footprint, use the smaller, lighter Centrotec chuck with its full array of interchangable drill and driver bits.

All the versatility of the T15+3 cordless drill is combined with a robust design that features a long-lasting, energy efficient brushless motor, compact transmission, and electronic health monitoring. Brushless motors offer significant advantages over motors with brushes, including higher efficiency and reliability, reduced noise, and longer service life to name a few. This helps the T15+3 cordless drill outperform other drills that would otherwise be in the same class. Nearly all of Festool's power tools feature intelligent electronic monitoring and feedback which makes the tool smarter. In the case of the T15+3, this technology protects the motor from overload, provides an electronic (rather than mechanical) clutch feature, and an intelligent drill mode with an electronic clutch override, as well as other innovative features.

Features:

• Dual Motor Speed Selector
  The T+3 offers two speed settings, which can be selected by the conveniently placed selector on the top of the drill. Changing the speed setting does not change the torque produced by the motor, which is electronically controlled. Use the speed selector in conjunction with the clutch setting to drill with full power or to drive delicate soft metal screws without damage.
• Drill / Drive Mode Selector
  Like all controls of the T+3, the drive/drill mode selector is conveniently located. When in drill mode, the drill automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages. Switch between drill and drive modes without losing your clutch setting, yet another way Festool helps you work faster, easier, smarter.
• Fuel Gauge
  With the integrated fuel gauge, there's no more guessing how much charge remains as you move on to your next task.
• Electronically Controlled Clutch
  Nearly all drills employ a mechanical clutch. The T+3 uses a superior, more sophisticated electronic clutch. The conveniently placed clutch dial controls the electronic clutch setting. This results in less wear on the motor and other wearable parts. When the clutch engages, the T+3 notifies you with an audible tone. When the clutch dialed to a setting below 10, the speed of the drill is also reduced automatically.
• Second Generation Brushless Motor
  The Festool T+3 cordless drill features a second generation brushless motor. Brushless motors offer many advantages over the brushed DC motors in all other cordless drills including higher efficiency, better reliability and longer service life. These advantages allow the T+3 to out perform other drills.
• Forward / Reverse Selector
  Use the forward / reverse selector to switch motor direction. Quickly switch between driving and removing screws.
• Soft, Ergonomic Grip
  You probably use your cordless drill for extended periods of time. Therefore, a primary concern when designing the T+3 was making it comfortable to use. The soft, rubberized grip reduces fatigue and the drill is designed to be well balanced. The use of Lithium Ion batteries has significantly lowered the weight of the drill also enhancing comfort.
• Magnetic Bit Storage
  Always have quick access to your most commonly used driver bits by stowing them on the drill. The magnetic bit stowage can accomodate up to four 1" driver bits.
• Ventilaition Ports
  The T+3 cordless drill has strategically placed ventilation ports to reduce the chances of premature wear due to overheating. The drill also features Festool's patented MMC electronics, which monitor and protect the drill from damage and overheating.
• Intelligent Lithium Ion Batteries
  With some of the most sophisticated Lithium Ion technology available, the T+3 batteries are backed by a full three-year warranty. The batteries are cell balanced meaning that battery cells are selected and matched to offer optimal charge and discharge cycles. The T+3 batteries can achieve full charge in under 70 minutes.
• Intelligent Battery Charger
  The T+3 cordless drill comes with an intelligent microprocessor-controlled battery charger that uses pulse charging technology. The charger is designed to protect your batteries from damage and prolong their life. Onboard LEDs provide instant status feedback. The charger is also compatible with Festool NiCD and NiMH batteries.
• Centrotec Chuck
  The Centrotec chuck is included with the T+3 drill set. The Centrotec chuck is designed to work seamlessly with the wide array of Festool Centrotec drill and driver bits. This smaller, lighter chuck offers better ergonomics compared to drills which only feature a keyless chuck. Simply depress the green ring on the chuck to release or insert a bit. The Centrotec chuck also accepts all standard hex shank bits with the included magnetic bit holder.
• Keyless Chuck
  The keyless chuck is included with the T+3 cordless drill set. This chuck accepts standard driver and drill bits up to 1/2" in diameter. A tool-less mechanism clamps down quickly on the bit to prevent slippage.

Included in Package

• Centrotec Starter Set
• Centrotec Chuck
• FastFix Keyless Chuck
• 2 Lithium Ion Batteries
• TRC 3 Charger
• SYS1 T-Loc Systainer

Specifications

Chuck Capacity	1/16" (1.5mm) to 1/2" (13mm)
Battery Voltage	14.4v (15v max)/3.0 Ah
RPM (Setting 1 / Setting 2)	0-450 / 0-1500
Max Drill Diameter (Steel)	5/8" (16mm)
Max Drill Diameter (Wood)	1-3/8" (35mm)
Max. Torque in Steel	354 in-lbs. (40 Nm)
Max. Torque in Wood	283.9 in-lbs. (27 Nm)
Motor Type	EC TEC Brushless
Torque Setting Range	4.4 - 70.8 in lbs (0.5 - 8 Nm)
Weight	3lbs 9oz (1.62 kg)

See It in Action!